Thread: jpeg/gif output from sac

Started: 2008-09-09 20:48:13
Last activity: 2008-09-10 00:49:44
Topics: SAC Help
Igor Stubailo
jpeg/gif output from sac
2008-09-09 20:48:13
Hello all,

I was wondering if there is an easy way to save the plots I get in sac?
Saving an image in png/gif/jpeg would work but I couldn't find such
options in the sac's help.

Thanks,
Igor

  • Kuang He
    Re: jpeg/gif output from sac
    2008-09-10 00:10:22
    Hi Igor,

    SAC does not have that capability by itself. It can be done using SAC
    and Imagemagick, which provides a tool called convert.

    Take a look at this:

    http://www.iris.washington.edu/pipermail/sac-help/2007-May/000259.html

    Best regards,

    --
    Kuang He
    Department of Physics
    University of Connecticut
    Storrs, CT 06269-3046

    Tel: +1.860.486.4919
    Web: http://www.phys.uconn.edu/~he/



    On Tue, Sep 9, 2008 at 4:48 PM, Igor Stubailo
    <stubailo<at>moho.ess.ucla.edu> wrote:
    Hello all,

    I was wondering if there is an easy way to save the plots I get in sac?
    Saving an image in png/gif/jpeg would work but I couldn't find such options
    in the sac's help.

    Thanks,
    Igor
    _______________________________________________
    sac-help mailing list
    sac-help<at>iris.washington.edu
    http://www.iris.washington.edu/mailman/listinfo/sac-help


    • Igor Stubailo
      Re: jpeg/gif output from sac
      2008-09-09 21:14:35
      Kuang,

      Thanks a lot. I am going to try that.

      -Igor

      On Tue, 9 Sep 2008, Kuang He wrote:

      Hi Igor,

      SAC does not have that capability by itself. It can be done using SAC
      and Imagemagick, which provides a tool called convert.

      Take a look at this:

      http://www.iris.washington.edu/pipermail/sac-help/2007-May/000259.html

      Best regards,

      --
      Kuang He
      Department of Physics
      University of Connecticut
      Storrs, CT 06269-3046

      Tel: +1.860.486.4919
      Web: http://www.phys.uconn.edu/~he/



      On Tue, Sep 9, 2008 at 4:48 PM, Igor Stubailo
      <stubailo<at>moho.ess.ucla.edu> wrote:
      Hello all,

      I was wondering if there is an easy way to save the plots I get in sac?
      Saving an image in png/gif/jpeg would work but I couldn't find such options
      in the sac's help.

      Thanks,
      Igor
      _______________________________________________
      sac-help mailing list
      sac-help<at>iris.washington.edu
      http://www.iris.washington.edu/mailman/listinfo/sac-help

      _______________________________________________
      sac-help mailing list
      sac-help<at>iris.washington.edu
      http://www.iris.washington.edu/mailman/listinfo/sac-help


      • Arthur Snoke
        Re: jpeg/gif output from sac
        2008-09-10 00:49:44
        If I understand your question correctly, you can save plots you made in SAC to
        an EPS file.

        1. First you must save the plot to a file. After you get the plot you like, enter

        bd sgf

        Then repeat your plot command that had produced your display. You will not see
        it, but it will produce a file in the directory you are in named f001.sgf.

        You can then convert the .sgf file to a Postscript or EPS file using programs
        and scripts provided with SAC. There is some discussion in utils/README_utils
        (in version 101.2). There are also comments about how one can make a PDF file,
        if you have the right script. Making an EPS file requires ghostscript. Not
        needed to make a simple postscript file.

        To convert the file to JPG, PNG, etc., you need another program. On a MAC that
        can be done in preview.

        Let me know if that is not clear -- or if you had a different question.

        Igor Stubailo wrote:
        Kuang,

        Thanks a lot. I am going to try that.

        -Igor

        On Tue, 9 Sep 2008, Kuang He wrote:

        Hi Igor,

        SAC does not have that capability by itself. It can be done using SAC
        and Imagemagick, which provides a tool called convert.

        Take a look at this:

        http://www.iris.washington.edu/pipermail/sac-help/2007-May/000259.html

        Best regards,

        --
        Kuang He
        Department of Physics
        University of Connecticut
        Storrs, CT 06269-3046

        Tel: +1.860.486.4919
        Web: http://www.phys.uconn.edu/~he/



        On Tue, Sep 9, 2008 at 4:48 PM, Igor Stubailo
        <stubailo<at>moho.ess.ucla.edu> wrote:
        Hello all,

        I was wondering if there is an easy way to save the plots I get in sac?
        Saving an image in png/gif/jpeg would work but I couldn't find such
        options
        in the sac's help.

        Thanks,
        Igor
        _______________________________________________
        sac-help mailing list
        sac-help<at>iris.washington.edu
        http://www.iris.washington.edu/mailman/listinfo/sac-help

        _______________________________________________
        sac-help mailing list
        sac-help<at>iris.washington.edu
        http://www.iris.washington.edu/mailman/listinfo/sac-help

        _______________________________________________
        sac-help mailing list
        sac-help<at>iris.washington.edu
        http://www.iris.washington.edu/mailman/listinfo/sac-help


        • Igor Stubailo
          Re: jpeg/gif output from sac
          2008-09-09 21:56:52
          Arthur,

          You understood my question correctly, thank you.
          Your method is similar to the one mentioned by Kuang. We tried it and it
          works!

          Thanks again,
          Igor

          On Tue, 9 Sep 2008, Arthur Snoke wrote:

          If I understand your question correctly, you can save plots you made in SAC
          to an EPS file.

          1. First you must save the plot to a file. After you get the plot you like,
          enter

          bd sgf

          Then repeat your plot command that had produced your display. You will not
          see it, but it will produce a file in the directory you are in named
          f001.sgf.

          You can then convert the .sgf file to a Postscript or EPS file using programs
          and scripts provided with SAC. There is some discussion in
          utils/README_utils (in version 101.2). There are also comments about how one
          can make a PDF file, if you have the right script. Making an EPS file
          requires ghostscript. Not needed to make a simple postscript file.

          To convert the file to JPG, PNG, etc., you need another program. On a MAC
          that can be done in preview.

          Let me know if that is not clear -- or if you had a different question.

          Igor Stubailo wrote:
          Kuang,

          Thanks a lot. I am going to try that.

          -Igor

          On Tue, 9 Sep 2008, Kuang He wrote:

          Hi Igor,

          SAC does not have that capability by itself. It can be done using SAC
          and Imagemagick, which provides a tool called convert.

          Take a look at this:

          http://www.iris.washington.edu/pipermail/sac-help/2007-May/000259.html

          Best regards,

          --
          Kuang He
          Department of Physics
          University of Connecticut
          Storrs, CT 06269-3046

          Tel: +1.860.486.4919
          Web: http://www.phys.uconn.edu/~he/



          On Tue, Sep 9, 2008 at 4:48 PM, Igor Stubailo
          <stubailo<at>moho.ess.ucla.edu> wrote:
          Hello all,

          I was wondering if there is an easy way to save the plots I get in sac?
          Saving an image in png/gif/jpeg would work but I couldn't find such
          options
          in the sac's help.

          Thanks,
          Igor
          _______________________________________________
          sac-help mailing list
          sac-help<at>iris.washington.edu
          http://www.iris.washington.edu/mailman/listinfo/sac-help

          _______________________________________________
          sac-help mailing list
          sac-help<at>iris.washington.edu
          http://www.iris.washington.edu/mailman/listinfo/sac-help

          _______________________________________________
          sac-help mailing list
          sac-help<at>iris.washington.edu
          http://www.iris.washington.edu/mailman/listinfo/sac-help



SAGE Facility has been certified as a trustworthy data repository by the CoreTrustSeal Standards and Certification Board
08:47:32 v.22510d55