[dhi-servers] IRIS DMC network server reboot

[Sue Schoch]

Transfer type B denotes an analog transfer type in DHI.

Sue

On May 5, 2008, at 2:49 PM, Sue Schoch wrote:

> I'm going to reboot the network server.  This will enable a new  
> version of the network server which changes the behavior of  
> instrumentation when a missing B53 is encountered.  The previous  
> version set the units to unknown and the transfer type to  
> COMPOSITE.  The new version will create a new blockette 53 like so:
>
> I#
> #                   +-----------------------------------+
> #                   |     Response (Poles and Zeros)    |
> #                   |        AU  BLDU     BHE           |
> #                   |     05/27/2003 to 12/31/2599      |
> #                   +-----------------------------------+
> #
> B053F03     Transfer function type:            B
> B053F04     Stage sequence number:             2
> B053F05     Response in units lookup:          VOLT
> B053F06     Response out units lookup:         VOLT
> B053F07     AO normalization factor:           +1.00000E+00
> B053F08     Normalization frequency:           +0.00000E+00
> B053F09     Number of zeroes:                  1
> B053F14     Number of poles:                   1
> #              Complex zeroes:
> #               i  real          imag          real_error     
> imag_error
> B053F10-13      0  +0.00000E+00  +0.00000E+00  +0.00000E+00   
> +0.00000E+00
> #              Complex poles:
> #               i  real          imag          real_error     
> imag_error
> B053F15-18      0  +0.00000E+00  +0.00000E+00  +0.00000E+00   
> +0.00000E+00
>
> Where the units in are the units out from the previous blockette and  
> the units out are the units in from the following blockette.
>
> Sue
> _______________________________________________
> dhi-servers mailing list
> dhi-servers at iris.washington.edu
> http://www.iris.washington.edu/mailman/listinfo/dhi-servers