Dear Friends and Colleagues:<div><br></div><div>It is quite a while that I am struggling with &#39;BEAM&#39; command of SAC and still cannot get it right.</div><div><br></div><div>For a signal (a 5.4 Mw earthquake in central Asia: 1996/01/09, centroid.  time: 06:27) approaching YELLOWKNIFE array  with bearing (azimuth) of 9.7 degrees (back-azimuth:</div>
<div>344.7 degrees), I ran the following command for all vertical components of the event read into SAC:</div><div><br></div><div>BEAM B 344.7 V 15 EC 33  6.0 C  0. 0. 0. W beam</div><div><br></div><div>The velocity of 18 Km/s is what I have calculated from the P slowness of 5.9 s/deg.</div>
<div><br></div><div>The resulting &#39;beam&#39; is not even so good if individual files are stacked with zero delay. Furthermore,</div><div>it is shifted about 10 seconds to the left.</div><div><br></div><div>Can anyone shed some light on this? SAC manual is really not a big help on this issue.</div>
<div><br></div><div>Thank you in advance,</div><div><br></div><div>Alireza</div>