[SAC-HELP] bus error with correlate command

[Angela Sarao']

I'm getting a bus error running a macro, when the

correlate master 1 number 350 length 20

instruction is executed to cross correlate two series of 896001 samples each.

Tested on Mac OS X 10.5.x and 10.6.x, with 32 and 64 bit Sac v.101.4.
Was giving the same error with v.101.3b. RAM on the test machines goes  
from 3 to 12 GB.

If I use only one window, like in

correlate master 1

the bus error does not occur. Also, the bus error does not occur if I  
decimate the samples before cross correlating.

NOTE: The same macro, with the same data, still works on an old Sun  
workstation with SunOS 5.9 and Sac Version 00.58d, 3GB RAM, no need to  
interpolate or use a single window

Is there a known limitation on the number of samples in current Sac,  
with respect to the old version 00.58d, or could it be a bug hidden  
somewhere?

Just in case, I have a tgz file (about 4MB) with macro and input data  
ready for testing, if there is interest.

Thanks

Angela

-- 
Angela Sarao'
Centro Ricerche Sismologiche
Istituto Nazionale di Oceanografia e Geofisica Sperimentale
Borgo Grotta Gigante, 42c
34010 Sgonico - Trieste, ITALY
tel.: +39.040.2140418
fax.: +39.040.2140365



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.