[SAC-HELP] Fwd: Body wave magnitude using SAC
Sheila Peacock
sheila at blacknest.gov.uk
Mon Nov 11 01:50:35 PST 2013
Dear Amr El-Sharkawy,
Sac will do only two things to help you with
magnitude calculation:
1. Remove the instrument response to convert the trace
to ground motion (use "transfer");
2. Allow you to pick amplitude and period of the desired
wave cycle (use "plotpk").
Also, you can use the spectrogram function to see
whether an arrival on which
you want to determine a surface wave magnitude really
is part of a dispersed Rayleigh wave train.
The amplitude-distance correction (e.g. Gutenberg-Richter
for body waves, Marshall-Basham for surface waves) has to
be applied separately, outside SAC.
The IASPEI manual of seismological observatory practice
contains some general information:
http://www.iaspei.org/projects/NMSOP.html
Hoping this is useful.
Sheila Peacock,
Blacknest.
-------- Original Message --------
Subject: [SAC-HELP] Body wave magnitude using SAC
Date: Sun, 10 Nov 2013 05:06:34 -0800 (PST)
From: Amr El-Sharkawy <amr_elsharkawy22 at yahoo.com>
Reply-To: Amr El-Sharkawy <amr_elsharkawy22 at yahoo.com>
To: sac-help-owner at iris.washington.edu <sac-help-owner at iris.washington.edu>, sac-help at iris.washington.edu <sac-help at iris.washington.edu>
My Dear Professors and collegues
I appreciate very well if you please can tell me how to calculate the body wave magnitude and surface wave mgnitude using the SAC software
I am waiting your kind response
Regards
amr
Amr El-Sharkawy
Seismologist, National Research Institute of
Astronomy and Geophysics, (NRIAG), Egypt.
e-mail: amr_elsharkawy22 at yahoo.com
amr_elsharkawy22 at nriag.sci.eg
Mobile: 01090201009
-------------- next part --------------
_______________________________________________
sac-help mailing list
sac-help at iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
More information about the sac-help
mailing list